Unit repeatedly power cycles

Power issues usually trace back to outlet load, unstable voltage, or a loose internal connection. Fix reboot loops and unstable power delivery.

• Confirm the outlet is live using a known-good device.
• Inspect the power cable and connector for damage.
• Check internal breaker or power switch status.

• Move the unit to a different outlet and retest.
• Reseat power connections and secure strain relief.
• Reduce shared load on the circuit if voltage drops.

• Avoid daisy-chaining high-load devices.
• Use a surge protector rated for commercial loads.
• Check cables during every service visit.

• No power response after verified outlet test.
• Repeated shutdowns after brief startup.
• Visible damage to power components.

Learn more at /haha-coolers.

• Confirm all steps are documented so the next technician can reproduce the results.
• Capture before/after metrics (errors cleared, sales restored, or uptime improved).
• Review machine, reader, or route settings to ensure they match location standards.

• Skipping a controlled test leads to false positives.
• Updating hardware without documenting configuration changes.
• Forgetting to verify payout, refund, or reconciliation data after changes.

• Run a final test with known-good inputs.
• Log the outcome with date, time, and device identifiers.
• Schedule a follow-up check if the location has high traffic or seasonal demand.

<!-- expanded:v2 -->

• Document changes with time, machine ID, and location name.
• Verify settings, pricing, and service modes after each fix.
• Capture before/after results to confirm resolution.

• Test with known-good inputs and controlled conditions.
• Validate telemetry, alerts, and payment logs where applicable.
• Confirm location expectations and update the site contact.

• Configuration drift after firmware or component swaps.
• Inconsistent power or network conditions at the location.
• Gaps in preventive maintenance routines.

• Monitor for 7 days and note any repeat errors.
• Schedule follow-up if the site is high-traffic.
• Escalate with full logs and photos if issues repeat.

• Validate camera calibration and lighting conditions.
• Confirm planogram and SKU mapping are accurate.

• Verify load accuracy to reduce mischarges.